SDS

7. HANDLING AND STORAGE
Precautions for safe handling: Do not puncture or incinerate (burn) cans. Do not stick pins, nails, or any other
sharp objects into opening on top of can. Do not spray in eyes. Do not take internally. See product label for
additional information.
Conditions for safe storage, including any incompatibilities: Store and use in cool, dry, well-ventilated areas.
Do not store above 120 F.
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Other Exposure LimitsACGIH Exposure LimitsOSHA Exposure LimitsChemical Name / CAS No.
TWA: 500 ppm;
PEL-CEILING: not
determined
TLV-TWA: 400 ppm
TLV-STEL: 500 ppm
NAPHTHA (PETROLEUM),
HYDROTREATED LIGHT
64742-49-0
Not established TWA: 1000 ppm
DIFLUOROETHANE
75-37-6
Appropriate engineering controls: Ventilation should be sufficient to prevent inhalation of any vapors . General
dilution and/or local exhoust ventilation in volume to keep PEL/TLV of most hazardous ingredient below acceptable
limit and lel below stated limit.
Individual protection measures:
Respiratory protection: None under normal use. Avoid breathing vapors. In restricted areas , use approved
chemical/mechanical filters designed to remove a combination or particles and vapor. In confined areas, use an
approved air line respirator or hood. Self-contained breathing apparatus is required for vapor concentrations above
PEL/TLV limits.
Protective gloves: None under normal use. Use solvent-resistant for prolonged or repeated contact.
Eye protection: None under normal use. However, use of safety glasses with splah guards or full face shield should
be used if indicated.
Other protective clothing or equipment: None under normal use. However, use of solvent- resitant aprons or other
clothing is recommended. Eye washes and safety showers in the workplace are recommended.
SHOWERS IN THE WORKPLACE ARE RECOMMENDED.
9. PHYSICAL AND CHEMICAL PROPERTIES
SDS for: 2916021
Page 3 of 4
Printed: 5/1/2015