MSDS

Product: Paslode® Cordless Tool Cleaner 219348
Page 3 of 3
(NOTE: This product is considered safe when used as directed.)
Section VII: Precautions for Safe Handling and Use
Steps to be Taken in Case Material is Released or Spilled:
Eliminate all ignition sources (vapor flammable). Ventilate area. At
area where vapors may collect, wear SCBA breathing apparatus. Small
spills should be flushed with large amounts of water. Large spills
should be absorbed on non-flammable absorbent material for disposal. A
release of 500 pounds or more may trigger the reporting requirements of
CERCLA Section 103.
Waste Disposal Method(s):
Incineration of liquid, incineration or landfill of contaminated
absorbent in accordance with local, state or federal regulations.
Contact local authorities for proper disposal method.
Precautions to be Taken in Handling and Storing:
Product should be kept in cool, dry environment. Keep product away
from ignition sources.
Other Precautions:
KEEP OUT OF REACH OF CHILDREN.
DO NOT PUNCTURE OR ATTEMPT TO OPEN PRESSURIZED CONTAINER UNDER ANY
CIRCUMSTANCES.
DISPOSE OF CONTAINER PROPERLY
USE ONLY AS DIRECTED.
Section VIII: Control Measures
Respiratory Protection (Specify Type):
None necessary when product is used as directed. Avoid prolonged or
repeated breathing of vapors.
Ventilation:
For commercial or home use, always provide adequate ventilation. Local
exhaust preferred. Mechanical exhaust acceptable.
Protective Gloves:
None necessary when used as directed.
Eye Protection:
None necessary when product is used as directed. Always avoid contact
with eyes.
Work/Hygienic Practices:
Normal safe working practices.
The information contained herein is based on the data available to us and is
believed to be correct to the best of our ability. However, Paslode makes no
warranty, expressed or implied, regarding the accuracy of this data nor
assumes any responsibility for injury from the intentional or non-intentional
misuse of this product.