MSDS

Product: CHEMPLEX 710-16/1LB Cans
Page 4 of 6
EYE PROTECTION:
Wear eye protection appropriate to prevent eye exposure. Where splashing is not
likely, chemical safety glasses with side shields are recommended. Where
splashing may occur, chemical goggles or full face shield is recommended.
SKIN PROTECTION:
Gloves are not normally needed during normal conditions of use. If health
effects are experienced, oil or chemical resistant gloves such as butyl or
nitrile are recommended.
Where splashing or soaking is likely, wear oil or chemical resistant clothing
to prevent exposure.
RESPIRATORY PROTECTION:
A respirator may be worn to reduce exposure to vapors, dust, or mist. Select a
NIOSH/MSHA approved respirator appropriate for the type and physical character
of the airborne material. A self-contained breathing apparatus is recommended
in all situations where airborne contaminant concentration has not been
confirmed to be below safe levels. Respirator use should comply with the OSHA
Respirator Protection Standard found in 29 CFR 1910.134.
ENGINEERING CONTROLS:
Normal general ventilation is expected to be adequate. It is recommended that
ventilation be designed in all instances to maintain airborne concentrations at
lowest practicable levels. Ventilation should at a minimum, prevent airborne
concentrations from exceeding any exposure limits listed in Section 2 of this
MSDS.
The user may wish to refer to 29 CFR 1910.1000(d)(2) and the ACGIH “Threshold
Limit Values for Chemical Substances and Physical Agents Biological Exposure
Indices” (Appendix C) for the determination of exposure limits of mixtures. An
industrial hygienist or similar professional may be consulted to confirm that
the calculated exposure limits apply.
______________________________________________________________________
SECTION 9 – Physical and Chemical Properties
Physical Appearance . . . . . .: White
Odor . . . . . . . . . .: Odorless
Physical State . . . . . . .: Semi-solid
Water Solubility . . . . . . .: Insoluble
Specific Gravity . . . . . . .: .970
______________________________________________________________________
SECTION 10 – Stability and Reactivity
INCOMPATIBILITIES:
This product is incompatible with strong oxidizing agents.
DECOMPOSITION PRODUCTS MAY INCLUDE:
Thermal decomposition products are dependent on combustion conditions.
A complex mixture of airborne solid, liquid, particulates and gasses may evolve
when the material burns. Combustion byproducts may include:
Oxides of carbon,
Incompletely burned hydrocarbons as fume and smoke.
CONDITIONS TO AVOID:
Avoid contact with incompatible materials and exposure to extreme temperatures.
POLYMERIZATION:
This product is not expected to polymerize.
STABILITY:
This product is stable.