MSDS

Product: CHEMPLEX 710-16/1LB Cans
Page 2 of 6
- INHALATION
This product has low volatility and so is not expected to cause respiratory
tract irritation during normal conditions of use. Exposure to high mist levels
in poorly ventilated areas may cause temporary irritation to the upper
respiratory tract.
- INGESTION
Ingestion may cause slight stomach irritation and discomfort.
POTENTIAL CHRONIC HEALTH EFFECTS:
No further data known.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
No further data known.
CARCINOGENICITY:
This product is not listed as a known or suspected carcinogen by IARC, OSHA, or
the NTP.
______________________________________________________________________
SECTION 4 – Fist Aid Measures
EYE CONTACT:
Hold eyelids open and flush with a steady, gentle stream of water for at least
15 minutes. If symptoms persist, contact a physician.
SKIN CONTACT:
Remove product from the skin by washing with a mild soap and water.
Contaminated clothing should be removed to prevent prolonged exposure. If
product is injected under the skin, seek treatment immediately. If symptoms of
exposure persist, contact a physician.
INHALATION:
If signs or symptoms of overexposure occur, remove the employee to fresh air.
If symptoms persist, seek medical attention.
Ingestion:
If ingested, dilute stomach contents with two glasses of milk or water. (NOTE:
DO NOT give anything by mouth to an unconscious person.) Do not induce vomiting
without medical supervision. If vomiting occurs spontaneously, keep airway
clear. If symptoms of ingestion persist, seek medical attention.
NOTE TO PHYSICIAN:
No further data known.
______________________________________________________________________
SECTION 5 – Fire Fighting Measures
FIRE AND EXPLOSIVE PROPERTIES:
Flashpoint . . . . . . 600.0 ΠCOC
Flammability Limits . . . . LEL -N/A
UEL -N/A
EXTINGUISHING MEDIA:
In accordance with NFPA guidance, dry chemical, foam or CO2 fire extinguishers
are all acceptable. Note that while water fog extinguishers are also
acceptable, DO NOT apply a direct stream of water onto burning product because
it may cause spreading and increase fire intensity.
UNUSUAL FIRE & EXPLOSION HAZARDS:
No further data known.