Manual

ManualsBrandsPASCO ManualsEquipmentPS-2168 General Science MultiMeasure Sensor

Instruction Manual

012-09456C

General Science MultiMeasure Sensor

PS-2168

Introduction

The PS-2168 General Science MultiMeasure Sensor combines four sensors in a single unit:

• Temperature

• Light

• Sound Level

•Voltage

Included Equipment Part Number

General Science MultiMeasure Sensor PS-2168

Stainless Steel Temperature Probe PS-2153 (not shown)

Voltage Probe PS-2165 (not shown)

Required Equipment

PASCO Interface

See PASCO catalog or

www.pasco.com

PASCO Data Acquisition Software

Optional Equipment

Fast-response Temperature Probe PS-2135 (3-pack)

Skin/surface Temperature Probe PS-2131

Temperature Probe

Voltage Probe

Summary of content (4 pages)

PAGE 1
Instruction Manual 012-09456C General Science MultiMeasure Sensor PS-2168 Included Equipment Part Number General Science MultiMeasure Sensor PS-2168 Stainless Steel Temperature Probe PS-2153 (not shown) Voltage Probe PS-2165 (not shown) Required Equipment PASCO Interface PASCO Data Acquisition Software See PASCO catalog or www.pasco.
PAGE 2
General Science MultiMeasure Sensor When connected to a PASPORT interface, the multi-sensor collects data at up to 200 samples per second from each component sensor. You can use just one component sensor at a time or any combination simultaneously. If you have a PASPORT interface that supports multiple sensors, or if you have more than one interface connected to your computer, you can use the General Science MultiMeasure Sensor in combination with other PASPORT sensors.
PAGE 3
Model No. PS-2168 Temperature Temperature Use this component of the multi-sensor to measure the temperature of a fluid or object. The measurement can be displayed in units of °C, °F, or K. (In DataStudio, click the Setup button to change units.) You can use the included stainless steel probe or a different probe, such as the Fast-response Probe (PS-2135) or Skin/Surface Probe (PS-2131). PASCO physics apparatus containing an embedded 10 k thermistor can also be connected to the multi-sensor.
PAGE 4
General Science MultiMeasure Sensor S peci fi c atio ns Specifications General Component Sensors Temperature, Light, Sound Level, Voltage Max. Sampling Rate 200 samples per second (for each component sensor) Default Sampling Rate 2 samples per second Temperature Range 35 °C to 135 °C Accuracy 0.5 °C Resolution 0.