User guide

DataStudio Starter Manual Manual No. 012-08107
4
®
Equipment and Software Setup
Depending on the type of interface, instructions for setting up DataStudio and other equipment can
vary. See the section that applies to your interface.
Starting DataStudio for the first time- PASPORT
If you are using a PASPort sensor, you can connect the equipment at any time. Details for proper
connection can be found in the interface's manual or the sensor's Quick Start Card.
Connecting a PASPORT Sensor should automatically launch the PASPORTAL window:
These are pre-designed
electronic workbooks.
To use, simply highlight
the desired lab and click
Open Selected
Workbook.
Clickheretolaunch
DataStudio and
create an
experiment on your
own.