User's Manual

®
High Current Sensor PS-2193
2
Specifications Technical Support
For assistance with any PASCO product, contact PASCO at:
Limited Warranty For a description of the product warranty, see the
PASCO catalog.
Copyright The PASCO scientific 012-10102A
High Current Sensor
Instruction Sheet
is copyrighted with all rights reserved. Permission is
granted to non-profit educational institutions for reproduction of any part of
this manual, providing the reproductions are used only in their laboratories
and classrooms, and are not sold for profit. Reproduction under any other
circumstances, without the written consent of PASCO scientific, is prohib-
ited.
Trademarks PASCO, PASCO scientific, PASPORT, and DataStudio are
trademarks or registered trademarks of PASCO scientific, in the United
States and/or in other countries. All other brands, products, or service
names are or may be trademarks or service marks of, and are used to
identify, products or services of, their respective owners. For more infor-
mation visit www.pasco.com/legal.
Measurable current range −10 A to +10 A
Measurement resolution 16 bits (approximately 300 µA)
Maximum circuit voltage 10 V above or below earth ground
Measurement accuracy 0.5% or 2.5 mA, whichever is greater
Sensing element series
resistance
0.01 Ω
Maximum sample rate 1000 samples/s
Maximum continuous current
without damage
12 A
Maximum continuous circuit
overvoltage without damage
40 V above or below earth ground
Terminals 4 mm banana jacks
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: [phone] (worldwide)
800-772-8700 (U.S.)
Fax: [phone]
Web: www.pasco.com
Email: [e-mail]