User's Manual

Complete Rotational System 012-05293F
4
Assembly
ME-8951 Rotating Platform
Assembling the Rotating Platform
1. Insert the cylindrical end of the shaft into the bearings
on the top-side of the A-shaped iron base. Secure the
shaft in place by inserting the "E" ring in the slot at
the bottom of the shaft. See Figure 1.
2. Mount the track to the shaft and tighten the thumb
screw against the flat side of the “D” on the shaft. See
Figure 1.
"A" base
rotating platform
"E" ring
vertical shaft
thumbscrew
flat of vertical shaft
Figure 1: Attaching the Vertical Shaft to the Base and Rotating Platform Assembly