Instruction Sheet 012-12816A ® *012-12816* Color Mixer OS-8496 Brightness control knobs Position adjustment tab Power input jack Rear view Front view Equipment Included Item Part number Color Mixer Assembly 003-12392 AC Adapter (100 - 240 V AC to 5 V DC at 2.6 A) 540-103 800-772-8700 www.pasco.
Color Mixer OS-8496 Recommended Items Part number Basic Optics Geometric Lens Set OS-8456 Viewing Screen OS-8460 Optics Bench OS-8508 (1.2 m) or OS-8541 (60 cm) Recommended Systems Part number Beginning Optics System OS-8459 Viewing Screen OS-8460 Geometric Lens Set (100 mm, 200 mm, -150 mm) OS-8466A Light Source OS-8470 Adjustable Lens Holder (2) OS-8474 Optics Bench (1.
Color Mixer 012-12816A OS-8496 Other Equipment Optics Bench: Beginning and Basic Optics components, such as the color mixer and view screen, snap into the wide central channel of the optics bench. Place the base of the component on the bench and push down firmly to snap it in place. To move it, squeeze the tab on the side of the component and slide the component along the bench. Use the metric scale on the bench to measure the positions of components.
Color Mixer OS-8496 Optics Bench without Lens View Screen Mount the Color Mixer at one end of a PASCO Optics Bench. Connect the power supply to the back of the Color Mixer and plug the power supply into an electrical receptacle. Mount a Viewing Screen near the Color Mixer. Adjust the position of the viewing screen so that the overlapping circles of red, green, and blue color are as large as possible on the screen.
Color Mixer 012-12816A OS-8496 The individual color wavelengths will vary from unit to unit due to minor variations in the LEDs. The peak wavelength ranges are as follows: Color Peak Wavelength Range Red 620 to 630 nanometers (nm) Green 520 to 535 nm Blue 450 to 465 nm Note that the Color Mixer LEDs are adapted to a specific purpose and will probably not match the peak wavelength ranges shown. Relative Radiant Power vs.
