User's Manual

Cast Beam Structures Set ME-7009

Triple Pulley and Axle

Use a hanging mass and three pulleys. The three pulleys multiply the applied load on the drying Cast Beam more than a single pul-

ley or a double pulley can. The ‘block-and-tackle’ arrangement of three pulleys has an Ideal Mechanical Advantage (IMA) of

3-to-1. The applied load is measured by a 100 N Load Cell and the load limit is 100 N.

Put the Collet in

the ‘jaw’ of the

Sliding

Connector.

Detail of the V-shaped

Cord Harness

Collet

Spacer

Pulley

V-shaped

cord harness

Sliding

Connector