User's Manual

Hydraulics Structures Set Spares Part Numbers

Spares Part Numbers

Summary of Extra Equipment Needed

ME-6985 Flexible I-Beam Set ME-6997 Full Round (XYZ) Connectors

#5 Flexible Beam (24 cm) - 16 Full Round Connector - 6

#4 Flexible Beam (17 cm) - 16 Flat Connector - 6

#3 Flexible Beam (11.5 cm) - 16 PAStrack Connector* - 6

ME-6986 Structures Rod Clamp (2 pack) ME-6998A Axle Spares

ME-6987 Flat Structures Members 1/2 by 1/4 by 1/4 Spacer - 12

Flat 3 x 4 Beam (19 cm) - 16 “O” Ring - 12

Flat #4 Beam (17 cm) - 16 Axle, Short (10.4 cm) - 2

Flat 2 x 3 Beam (12.5 cm) - 16 Axle, Medium (21.3 cm) - 2

ME-6993 Truss Set Members Axle, Long (26.6 cm) - 2

#5 Beam (24 cm long) - 24 Collet - 24

#4 Beam (17 cm long) - 54 Pulley - 12

#3 Beam (11.5 cm long) - 54 Wheel - 4

#2 Beam (8 cm long) - 24 Tire - 4

#1 Beam (5.5 cm long) - 24 ME-6999A Angle Connector Spares

Half Round Connector - 42 Angle Connector - 24

ME-6994 Truss Set Screws Straight Connector - 24

Screw (6 - 32) - 300 Sliding Connector - 12

ME-6996 Cord Lock Spares ME-9876 Yellow Cord (2 pack)

Cord Tensioning Clip - 32 Cord, Braided, #18 Yellow - 2 rolls

Cord, Braided, #18 Yellow - 1 roll

Extra Equipment (Model) Where Used

Hooked Mass Set (SE-8759) All

Yellow Cord (ME-9876) All

Large Slotted Mass Set (ME-7566 or ME-7589) Hydraulic Boom, Fork Lift, Ideal Gas Law

Structures Rod Clamp (ME-6986) Hydraulic Boom, Ideal Gas Law

45-cm Steel Rod (ME-8736) Hydraulic Boom, Ideal Gas Law

Rotary Motion Sensor (PS-2120) Hydraulic Boom, Ideal Gas Law

Ideal Gas Law Apparatus (TD-8596A) Ideal Gas Law

Pressure/Temperature Sensor (PS-2146) Ideal Gas Law

Absolute Pressure Sensor (PS-2108) Hydraulic Boom

PASport Interface (see catalog or web site) Hydraulic Boom, Ideal Gas Law

Foam core board (art or office supply store) Fork Lift, Scissors Lift

*1/4 - 20 Thumbscrew

and Square Nut