User's Manual

®
Hydraulics Structures Set Hydraulic Boom Details
8
Hydraulic Boom Details
Medium Axle Detail
#2
#3
#2
Collet
Medium
Axle
Hydraulic
Cylinder
#2
Half
Round
#2
• Put the medium axle through a trun-
nion hole on the hydraulic cylinder.
• Use collets and thumbscrews on both
sides of the hydraulic cylinder to posi-
tion the cylinder at the middle of the
axle.
• Use thumbscrews to attach the
medium axle to the half round connec-
tors.
Thumbscrew
Short Axle Detail
Thumbscrew
Short
Axle
#1
#1
Put the axle through
the mounting hole at
the top of the piston.
Half
Round
Long Axle Detail
Half
Round
Half
Round
Flat
Round
Collet
Collet
Thumbscrew
#1
#1
Spacer
Spacer
#1
Long Axle
Drive
Wheel
#4
#5
Align the drive wheel with
the larger step of the
three-step pulley on the
Rotary Motion Sensor.
Stretch the O-ring drive
belt from the drive wheel
to the step pulley.
Thumbscrew