User's Manual

SE-9639 Franck-Hertz Experiment

012-14264A

Recommended Items

Limited Warranty and Limitation of Liability

This Brolight product is free from defects in material and workmanship for one year from the date of purchase. This warranty

does not cover fuses, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation

or handling. Resellers are not authorized to extend any other warranty on Brolight’s behalf. To obtain service during the war-

ranty period, return the unit to point of purchase with a description of the problem.THIS WARRANTY IS YOUR ONLY

REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR

IMPLIED. BROLIGHT IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAM-

AGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the exclusion

or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

Safety Information

• Do not clean the equipment with a wet cloth.

• Before use, verify that the apparatus is not damaged.

• Do not defeat power cord safety ground feature.

• Plug into a grounded (earthed) outlet.

• Do not use the product in any manner that is not specified by the manufacturer.

• Do not install substitute parts or perform any unauthorized modification to the product.

• Line and Current Protection Fuses: For continued protection against fire, replace the line fuse and the

current-protection fuse only with fuses of the specified type and rating.

• Main Power and Test Input Disconnect: Unplug instrument from wall outlet, remove power cord, and

remove all probes from all terminals before servicing. Only qualified, service-trained personnel should

remove the cover from the instrument.

• Do not use the equipment if it is damaged. Before you use the equipment, inspect the case. Pay particular

attention to the insulation surrounding the connectors.

• Do not use the equipment if it operates abnormally. Protection may be impaired.

• When in doubt, have the equipment serviced.

• Do not operate the equipment where explosive gas, vapor, or dust is present. Don't use it under wet

conditions.

• Do not apply more than the rated voltage, as marked on the apparatus, between terminals or between any

terminal and earth ground.

• When servicing the equipment, use only specified replacement parts.

• Use caution when working with voltages above 30 V AC rms, 42 V peak, or 60 V DC. Such voltages pose

a shock hazard.

• To avoid electric shock, do not touch any bare conductor with hand or skin.

• Adhere to local and national safety codes. Individual protective equipment must be used to prevent shock

and arc blast injury where hazardous live conductors are exposed.

Item Model Quantity

850 Universal Interface UI-5000 1

PASCO Capstone Software UI-5400 1

WARNING: To avoid possible electric shock or personal history, follow these guidelines.