User's Manual

012-05892A AC/DC Electronics Laboratory

➃ Click the “Add Plot” menu button ( ) at the lower left corner of the Graph. Select “Data

Cache,

Filtered Full Rectified voltage” from the “Add Plot” menu.

➄ Click again on the “Add Plot” menu button ( ) at the lower left corner of the Graph.

Select “Data Cache,

Load Resistor Voltage” from the “Add Plot” menu.

➅ Click anywhere on the vertical axis of the top plot (Full rectified voltage). The “Enter Plot Y

Scale” window opens.

➆ Type in “10” for the Max and “-10 for the Min, and then click “OK”.

➇ Click anywhere on the vertical axis of the middle plot (Filtered Full Rectified Voltage). Type in

“10” and “-10” for the Max and Min and then click “OK. Repeat for the bottom plot (

Load

Resistor Voltage)

• Optional: If a printer is available, select “Print Active Display” from the File menu.