User's Manual

81
012-05892A AC/DC Electronics Laboratory
®
➈ Click the “MON” button ( ) to begin data monitoring.
➉ Click the “STOP” button.
11
Click the “Data Snapshot” button ( ) for the “B” channel. Enter Data Cache Information for
“Long Name”, “Short Name”, and Units as needed to save the data for analysis.
12
Click the “OFF” button ( ) in the Signal Generator window.
13
Put the 10 Ω resistor in parallel with the 470 µF capacitor and the 100 Ω resistor.
14
Click the “ON” button ( ) in the Signal Generator window.
15
Click the “MON” button ( ) to begin data monitoring.