User's Manual

72
AC/DC Electronics Laboratory 012-05892A
®
➃ Click the “Add Plot” menu button ( ) at the lower left corner of the Graph. Select “Data
Cache, Resistor Voltage” from the “Add Plot” menu.
➄ Click anywhere on the vertical axis of the top plot (Diode Voltage). The “Enter Plot Y Scale”
window opens.
➅ Type in “6.5” for the Max and -6.5 for the Min, and then click “OK”. Repeat for the bottom plot
(Resistor Voltage)
• Both plots will have approximately the same scale for the vertical axis.
• Optional: If a printer is available, select “Print Active Display” from the File menu.