User's Manual

AC/DC Electronics Laboratory 012-05892A

• The “A” channel trace on the Scope display is the voltage across the diode. The “B” channel trace

is the voltage across the resistor.

➃ To “capture” the data displayed in the Scope, click the “PAUSE” button ( ) to temporarily

halt data monitoring when both traces are completely across the Scope screen.

➄ To save the data for the top trace, click the top “Data Snapshot” button ( ) in the right hand

corner of the Scope display. This will open the “Data Cache Information” window.

➆ Enter information for the “Long Name”, “Short Name”, and Units, then click “OK”.