User's Manual

ManualsBrandsPASCO Specialty & Mfg. ManualsStud SensorPASCO Specialty & Mfg. ABSOLUTE PRESSURE/TEMPERATURE SENSOR PS-2146

Instruction Sheet

012-08708B

Absolute Pressure/Temperature Sensor

PS-2146

*012-08708*

Included Equipment Part Number

Absolute Pressure/Temperature Sensor PS-2146

Hose and Coupling Kit 003-05543

Polyurethane tubing, 0.125” ID (2 ft.)

In-line connector (4)

Quick release connector (4)

Syringe, 60 cubic centimeters 699-166

Fast Response Temperature Probe PS-2135 (pack of three)

PASPORT Sensor Extension Cable PS-2500

Required Equipment Part Number

PASCO Interface and Software see the PASCO catalog or www.pasco.com

Recommended Equipment Part Number

Ideal Gas Law Syringe TD-8596A

Absolute Zero Apparatus TD-8595

Temperature

port

Tubing

Pressure

port

Syringe

In-line

connector

Quick release

connector

Sensor

Fast Response

Temperature Probe

9 pin mini DIN

plug

Mini

stereo

plug

PASPORT Sensor

Extension Cable

Summary of content (4 pages)

PAGE 1
Instruction Sheet 012- 08708B *012-08708* Absolute Pressure/Temperature Sensor PS-2146 Tubing Mini stereo plug 9 pin mini DIN plug Syringe Quick release connector In-line connector Fast Response Temperature Probe Sensor Pressure port PASPORT Sensor Extension Cable Temperature port Included Equipment Part Number Absolute Pressure/Temperature Sensor PS-2146 Hose and Coupling Kit 003-05543 Polyurethane tubing, 0.125” ID (2 ft.
PAGE 2
Absolute Pressure/Temperature Sensor PS- 2146 Introduction The Absolute Pressure/Temperature Sensor simultaneously measures gas pressure and temperature. The pressure range is from 0 kilopascals (kPa) to 700 kPa. The included Fast Response Temperature Probe plugs into the temperature port and has a range from -10 °C to 70 °C. The sensor includes tubing, quick release connectors, and in-line connectors. Quick Start 1. Connect the sensor to your PASCO interface.
PAGE 3
Absolute Pressure/Temperature Sensor PS-2146 Calibration The absolute pressure for this sensor is factory calibrated and for temperature, calibration is usually not necessary. However, a one-point or two-point calibration for temperature can be performed. To do so, you must have an accurate, independent means of measuring temperature, such as a thermometer. For instructions, refer to the documentation for your data acquisition software or data logger.
PAGE 4
Absolute Pressure/Temperature Sensor PS- 2146 Technical Support For assistance with any PASCO product, contact PASCO at: Address: PASCO scientific 10101 Foothills Blvd. Roseville, CA 95747-7100 Phone: 916-786-3800 (worldwide) 800-772-8700 (U.S.) Fax: (916) 786-7565 Web: www.pasco.com Email: support@pasco.com For the latest information on the product or the instruction manual, visit the PASCO web site at www.pasco.com and enter PS-2146 into the Search window.