Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58593
Unthread flange by turning
counterclockwise.
Unthread retaining nut and
remove stem by pulling
straight out.
Install new stem, and thread
retaining nut into faucet body.
Reinstall flange and sleeve by
tightening set screw.
Installation Instructions
Unthread flange by turning counterclockwise. Unthread retaining nut and remove stem by pulling straight out. Install new stem, and thread retaining nut into faucet body.
Reinstall flange and sleeve by tightening set screw.