Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58583
Installation Instructions
1. Turn off water supply to sink.
2. Use pliers to unthread nut on old spray head. Remove old spray head and retainer clip from hose.
3. Remove rubber washer at end of hose and slide nut off of hose.
4. Use basin wrench to unthread nut on old spray hose from nipple on faucet. Remove old spray hose.
5. Screw new spray hose nut onto nipple on faucet. Tighten with basin wrench. Do not over-tighten.
6. Thread new spray hose through spray hose guide. Note: Be sure that hose is not engtangled with
water supply lines.
7. Place new nut over spray hose and secure with new retainer clip.
8. Re-install sprayhead removed in steps 2 & 3 or install new sprayhead per instructions supplied with
new spray head.
9. Turn on water supply to sink. Check for leaks.
Tools needed for installation: • Basin Wrench • Adjustable Pliers
58583
WARNING: Cancer - www.P65warnings.ca.gov