Installation Guide

www.partsmasterpro.com

1-877-542-2211

customerservice@theonlyagencyrep.com

58174

1. Turn off water supply.

2. Remove retaining screw.

3. Remove handle by pulling straight out.

4. Remove handle cap and retaining screw.

5. Thread retaining screw into adapter and stem. Tighten set screws on

handle adapter.

6. Unthread retaining screw.

7. Place new handle on stem with adapter.

8. Select new retaining screw length and thread size to fit stem.

9. Tighten handle to stem with new retaining screw.

10. Select necessary handle cap and install on handle.

11. Turn on water supply.

WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Installation Instructions

PAGE 1
-877-542-2211 customerservice@theonlyagencyrep.com 58174 Installation Instructions 1. 2. 3. 4. 5. Turn off water supply. Remove retaining screw. Remove handle by pulling straight out. Remove handle cap and retaining screw. Thread retaining screw into adapter and stem. Tighten set screws on handle adapter. 6. Unthread retaining screw. 7. Place new handle on stem with adapter. 8. Select new retaining screw length and thread size to fit stem. 9. Tighten handle to stem with new retaining screw. 10.