PTC-100 Compact Wireless Charger Manual Product Name : Wireless Charging PAD Model : PTC-100 Manufacturer : Partron Co., Ltd. 22 Samsung 1-ro 2-gil, Hwaseong-si, Gyeonggi-do, Korea 445-170 TEL 82-31-201-7791 | FAX 82-31-201-7800 | Homepage www.partron.co.kr / www.croise.co.
Precautions for safety The contents inside the product warranty is described below to ensure user's safety and prevent property damage. Please read the manual carefully to use the product appropriately. Partron is not responsible for any injury or damage occurred by not following safety precautions. Please do not use damaged power cord, plug, and loose socket. Please do not contact power plug with wet hands, and do not unplug by pulling the cord part. Please do not bend or damage power cord.
- Please be cautious and guide children, baby or pet not to suck or bite the product. - Please do not use the product other than its original purpose. - Please leave the product on dry area where is not wet or damp. Humidity or liquid components can damage on part and circuit of product. If product gets wet, remove the moisture with a dry towel and take it to service center. - Do not alter, disassemble, or repair. Make sure to use a repair service center qualied by Parton.
Using the Product 1. Please connect power after connecting AC ADAPTER(sold separately) to compact wireless charger. ( ! ) Be sure to use original 5V/2.0A AC ADAPTER. Otherwise, it will not be recharged properly, or it can cause defects or damage. - Especially, AC ADAPTER for compact wireless charger is 5V/2.0A, so use of nonstandard ADAPTER can lead to slow recharge. - If this 5V/2.
Color of Status indicator Wireless Charger Status Off Standby and Charging completed Green Flashed Charging in progress When foreign object (knife, key, metal substance and etc) is Red Flashed Fast recognized between cell phone and compact wireless charger, FOD function operates Red Flashed Slow Red Fixed Pressure lower than rated power (5V/2A of Genuine Adapter is recommended.
3. Please separate AC ADAPTER (sold separately) from compact wireless charger when charging is completed. ( ! ) To check charging status, please check charger icon on your cell phone display. - Wireless charger might not function properly if foreign substances exist between cell phone and compact wireless charger. - DMB is not available while wireless charging. - If compact wireless charger is used where signal is weak, reception rate of cell phone could be weak.
Spec and Features ITEM Specification Size 72 x 72 x 15 (W x L x T) mm3 Recharging Method Magnetic Induction Method (WPC Standard) Transmission Power DC 5W (Maximum 5V, 1A) Using Frequency Range 115 ~ 205kHz Input Power DC 5V, 2.0A Operating Temperature -20 ℃ ~ +60 ℃ FCC Warning information FCC Part 15.19 This device complies with part 15 of the FCC Rules.
