PBH-300 User Manual * Please refer to the manual at www.croise.co.
CE Compliance Information Croise.R, hereby declares that this PBH-300 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC Compliance Information FCC ID : 2AD5K-PBH300 This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Package Contents PSB-300 User Manual Package Contents Description of Parts Installation of Cable Clip Product Specifications and Features How to use Power on/off Charging Pairing Calling Transferring a Call Volume Control Music Play Multi-Connection Using Croise.
/ Package Contents / ※ The components of above package are subject to change without notice to improve the product performance or quality.
/ Description of Parts / Mic 1 Micro USB Volume Up Volume Down LED Mic 2 Play / Pause Call
/ Installation of Cable Clip / Please hang the clip on the headset band by stretching it little bit. Place it at the suit position and fix the earphone cable properly. ※ The length of cable from the headset body to a user's ear can be easily adjusted through using the clip.
/ Product Specifications and features / Standby Time 600 hours Operating Time(Talk) 15 hours Operating Time (Music) Charging Time Battery Working Distance Supported profiles Decoder Bluetooth Version Power Consumption 15 hours 2 hours Lithium Polymer Battery 3.7V (210mAh) 10m HFP / HSP / A2DP / AVRCP SBC, APT-X Version 4.1 0.5W ※ Above operating time subject to change based upon connected devices or the surrounding environment.
/ How to use / 1. Power On / Off Power On - Press the button for 1 second - The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide. Power Off - Press the button for 3 seconds - The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide. 2. Battery Charging LED indicator - When the charger is connected, the Red LED is on. - When charging is completed, the Blue LED is on.
Recommendations - Using USB Hub may take extra charging time due to the low current. For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger. ※ It takes approximately 2 hours to have it fully charged when battery exhausted 3. Battery Status Alarm & Alert - Press Call and Volume + button at the same time for a second for audio guidance for the current battery level. “Battery Full” / “Battery Half” / “Battery not enough” 4.
6. Pairing Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device. * Pairing : Connect between Bluetooth-enabled Device and Headset. - Press the call button for 1 second to turn on the device - After power on, the headset will automatically enter to pairing mode. (The red/blue LED light flashes) - The headset will automatically enter to waiting mode if it is not connected for 3 minutes.
Clearing Paired Device - Hold call button for 1 second and Volume button while placing power slide switch to ON then paired device will be cleared with voice guide “ Clear Paired List” and enter to Pairing Mode. 7. Calling Voice Dial - Briefly press Call button to activate Voice Dial. ※ To use Voice Dialing, your mobile phone must support Voice Dialing. 8. Call Answer / Call End / Call Reject Call Answer / Call End - Briefly press Call button to answer the incoming call.
9. Call Transfer - During the call, press Call button for 1 second, audio will be transferred from headset to mobile phone. - And press Call button for 1 second again, audio will be transferred from mobile phone to headset. 10. Setting Waiting Mode while Calling Setting Waiting mode - During the call, briefly press Call button twice and enter to call waiting mode. Pressing Call button twice again back to the call mode. ※ To use Call waiting mode, the mobile phone must support ‘Call waiting’ service.
11. Volume Control Volume Up - While calling or listening the music, briefly press Volume + button. Volume Down - While calling or listening the music, briefly press Volume - button. Mute - During the call, press Volume +, - button at the same time for mute. - Press Volume +, - button at the same time again to cancel the mute. 12. Music Music Play / Music Pause - To play a song or pause playback, press Play/Pause button. Music Stop - Press Play / Pause button for 1second.
Skip Backward - It goes back to previous music if press the Volume - button for 1 second during play Skip Forward - It goes to the next music if press the Volume + button for 1 second during play Rewind - It rewinds if press the Volume - button for 3 second during play Fast Forward - It forwards if press the Volume + button for 3 second during play 13. Language set-up change Language set-up will be changed if press the Volume + & Volume ‒ together for 3 seconds.
14. Advanced Multi-Connection Multi-connection is useful to link more than a mobile device. Pairing - Proceed pairing of the first device manually. - Power off the headset upon registration of the first device is completed. - Power on holding the call button for pairing mode. - Pairing 2nd device for registration. - Connecting 1st device to the headset. Calling - Ring tone sounds when the second device has incoming call while you are talking through first device.
15. Auto Reconnect Automatic connection when headset is turned on - If it kept the information of previously paired device, it will be automatically connected when headset is turned on. ※ If it failed automatic connection, briefly press Call button once to connect. Out Of Range - If a connected device is more than 10m away from the device, voice guides "Disconnected" with the vibration.
. Button function and status information Function Power ON Action Press the call button for 1 second Power OFF Press the call button for 3 seconds Volume Down Briefly press the volume - button Volume Up Answer Call Reject Call Call Cancel Briefly press the volume + button Briefly press the call button Press the call button for 1 second and take off Briefly press the call button during the call Mute Press the volume +, volume ‒ shortly at the same time Call Waiting Press the call button quickly t
Function Action Connection to Mobile Phone Briefly press the call button on connection standby status Pairing Mode Press the call button for 3 seconds in off mode Battery Status check Press the call button & volume button at the same time for 1 second.
Function Action Skip Backward Press the volume ‒ button for 1 second and take off during playing the music Skip Forward Press the volume + button for 1 second and take off during playing the music Fast Forward Rewind Language set-up change Press the volume + button for 3 seconds and take off during playing the music Press the volume - button for 3 seconds and take off during playing the music Press the volume + and volume ‒ at the same time for 3 seconds.
/ Precautions / • Do not disassemble or modify. It may cause fire and disorder. • Do not use or place the product at high or low temperature. • Do not place the product near the high humidity, volatile, or flammables. • Please be cautious not to shock on the product. • It might give negative effect on the ear hearing if used for a long time in high volume. • This bluetooth device might be damaged if either over 1A/1000mA of charger or the defective charger is used.
/ Product Warranty and Service / • This device passed strict quality management and inspection process. • Warranty period is 1 year. • Even in the warranty period, you can be charged for the paid service if needed. • Product dimension and outer appearance might be changed for the quality improvement without advance notice. • This device cannot be used for the human rescue related service as it have the interference.
/ Product Warranty / •The warranty is valid only if the original receipt issued to the original purchaser by the dealer. •If the product label is removed, physical change of the product or unapproved repair by the 3rd person, will invalidate of the warranty. •The consumables, such as ear cap, battery and other accessories, which have limited life, will be excluded from the product warranty. •This Warranty do not cover for the damage and accident by the misuse.
/ Product Warranty Card / Product Name Purchased Date Month Day Year Purchased Place Model No.
1. Model Name : Bluetooth Headset 2. Part Number : PBH-300 3. Manufacturer : PARTRON Co., Ltd. 4. Country of Origin : Republic of Korea 5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea - Please take the time to follow the instructions in this owner’s guide carefully. - Appearance and specifications of this product are subject to change without prior notice for product improvement.
