User's Manual

APPLICATION AND OPERATION: MSR Module
55
ENGLISH
MSR Module
The Magnetic Stripe Reader module supports tracks 1, 2, and 3 covering possible
reading methods currently in use.
Configuring MSR Settings
Use the MSR settings menu to configure the MSR module related settings.
1. On the Home screen, touch > Settings >
MSR Settings.
2. Touch one of the following options:
• Track setting: Configure tracks order, start
sentinels, and end sentinels settings.
By default, the start sentinel of a magnetic stripe
card is already set based on the ISO standard:
- Track 1: %
- Track 2: ;
- Track 3: +
• Prefix and suffix setting: Configure the prefix
and suffix characters for package/track settings.
• Output setting: Configure the output mode,
reader and buzzer settings.
• Restore factory default settings: Return all MSR settings to the factory
default settings.
• MSR Demo: Select to test the MSR module.
• Firmware Version: The module firmware version will display on screen
within 10 seconds.
3. Touch to return to the Home screen.