User's Manual

Each of M1 data is stored in the sector. Each sector has its own key .If appear the
"Authority M1 Card Err", when you use the " M1 Read the Write ", I lustrate the key
Authentication is not passed. It is normal.
4 . RIF test，include A
card，B card and M1
card. click the button.
If you want to test M1 function, the first , put M1 on
the RF sensing area, Click on the "M1 Check "to
check card , if non-access module is hardware or the
card is not damaged, you can
see the following:
5. Wireless, WCDMA test. Click "Auto Dial”, wait for the POS automatically dial. If you
have used WCDMA capabilities, you need to disconnect in order to continue to use
this.