User Manual

MD-150M User Manual
4. “E2” ( Reset reader)
Controller send：
SOH
“S”
ID1 ID2
“E” “2”
STX ETX BCC
USB Reader responds：
SOH
“s”
ID1 ID2
“E” “2”
STX
data
ETX BCC
Function description:
1. Use this function to reset USB Reader.
2. If “data” value responded is “Y” means the set up is successful, “N” means failed,
repeated or no data.
3. CF Card will respond “Y” first then commence reset.
Example：
Controller send：
SOH + "S01E2" + STX + ETX + BCC
USB Reader responds：
SOH + "s01E2" + STX + “Y” + ETX + BCC (“Y” means the set up is successful)
- 10 -