User's Manual

D3 POS User Reference
65
12. Cradle – D3 POS Accessory option facts
① battery charging port
- battery can be charged by inserting here.
② USB Client
- If you plug in a portable USB, drive is
generated. (My device)
Generated device is interlocked with AT970.
You can use and interchange with data on
both sides.
③ DC Adopter porter
- To supply power plug in adopter.
Check whether product is supplied with power
or not .
If the LED on the left side of the AT970 comes
red lamp, AT970 is charging. If green lamp
comes, Charging battery is complete.
④ 24pin USB data port
- Connect 24pin data cable.
AT970 can interchange data with computer
after sync is connected.
⑤ RS-232port
- AT970 can use RS-232port connecting other
products available.
1. battery charging port
2. USB client
3. DC Adopter port
4. 24pin USB data port
5. RS-232port