User's Manual

D3POS User Reference
50
5.1 Executing the GPS
To execute GPS:
Tap start > program > GPS_xxx.exe
5.2 Configuring the Port and Baud Setting for Executing the GPS
To use the GPS installed on your D3 POS, you need to make the GPS’ s power on. For that,
please double-click the “ GPS_Power_Init “ -the EXE file that in the “ Flash Disk” . And
than tap the GPS EXE icon, the following GPS screen appears.
If you tap the Agree tap in the figure 5, the Com Setting screen appears. For executing the
GPS, you need to configure the port and baud at first. Select the “ connect” on the
command bar, and select Serial Port(Com Port) in the pop-up menu. And select these
settings.
GPS port: COM6(GPS_Top.exe)
Baud: 9600 bps
Figure 4. Executed GPS screen Figure 5. Comm Setting
Figure 6. Com Setting screen