User's Manual

D3 POS User Reference
41
2. Wireless LAN - D3 POS option facts
The D3 POS is versatile mobile computer that you can add to your wireless LAN. It has an
internal 802.11 b/g radio to transfer data using wireless communications. This section of the
manual assumes that you have already set up your wireless communications network
including access points.
Your D3 POS supports TCP/IP network protocols. In a TCP/IP network, the D3 POS
communicates with a host computer directly using TCP/IP. The access point acts a bridge to
allow communications in wireless networks
.
2.1 Power on Wireless LAN
The default of Wireless LAN was set with “ WLan off” when your D3 POS was manufactured
at the factory.
To make wireless LAN on:
1. Select Start > Programs > ATWlan
After selecting “ WLan On” the LAN icon appears on the control bar.
Connecting your D3 POS to a network device:
Double tap LAN icon > tap Wireless Information.
Figure 1. Wireless icon Figure 2. Select AP