Datasheet

ThePhoton(withoutheaders)canbesurfacemounteddirectlyinanendapplicationPCBusing
thefollowingPCBlandpattern:
TOPTHROUGHVIEW
Inadditiontothe24pinsaroundtheoutsideofthePhoton,thereare7padsonthebottomthe
PhotonPCBthatcanbeusedtoconnecttoextrasignals:RGBLEDoutputs,SETUPbutton,SMPS
enablelineandUSBD+/D-.PhotonPins#25-31aredescribedinthePinoutdiagrams.
Soldermaskaroundexposedcopperpadsshouldbe0.1mm(4mils)largerinalldirections.E.g.,a
0.08"x0.10"padwouldhavea0.088"x0.108"soldermask.
APhotonwithoutheaderspartforEAGLEcanbefoundinthe ParticleEAGLElibrary
RECOMMENDEDPCBLANDPATTERN(PHOTONWITHOUTHEADERS)