Datasheet
General information
Design
The system comprises marker carriers with holes at
either end or as raised bridges for direct threading of
steel cable ties, enabling rapid tting.
Single-character markers are threaded and combined
over the carrier, and xed over its bottom edge.
For multi-character marking, text is stamped on the
marker carriers themselves, to form complete multi-
character markers. Marker carriers can be stamped with
permanent text that can then be combined with single-
character markers, to produce a system that remains
uniform in appearance.
Text
Single-character markers: 0– 9, A– Z, Å, Ä, Ö,
special characters and symbols.
Multi-character markers: alphanumeric characters
0 – 9, A – Z, Å, Ä, Ö, special characters and
symbols with customized text arranged in either one
or two rows.
Facts
Durability:
Non-ammable. Good resistance to heat, cold,
corrosion, acids, chemicals etc.
Material:
Acid-resistant stainless steel to Swedish Standard
SIS2347/SIS 2348, equivalent to AISI316 L and
DIN 17440.
Print:
High quality stamping to give text that is clearly
visible even after it has been painted over.
Means of attachment:
- Fastening wires in acid-resistant steel material
to Swedish Standard SIS2347, equivalent to
AISI316 and DIN 17440.
- Stainless steel cable ties with ball-and-socket
locking system. Standard execution is aisi3ı6.
- Bolts or rivets for marker sleeves/marker plates
with holes.
Contact Partex for more information.
PKS
Stainless steel marking
• Complete marking system for cables, hoses, pipes and
components.
• Single-character and multi-character markers which
can be combined on site.
• Made of acid-resistant stainless steel for aggressive
environments and resistance to re damage.
• Alternatively, marking can be carried out on site with
the help of easy-to-use single-characters, supplied
either in rell packs or in complete sets.
• Enhanced durability and top quality.
• All marking information on one marker carrier gives
substantial reduction in marking cost per mounted
character
2011-02-11
Single & multi character marking