User manual

24 Settings
Pitch
Flying forwards or backwards
Camera tilt
Tilting the camera upwards or downwards
Camera pan
Rotating the camera to the right or left
Joysticks sensitivity
To set the sensitivity of the joysticks, press .
To change the setting mode, press Linear or Exponential.
To change the sensitivity of both joysticks simultaneously, press .
To reset the default configuration, press .
Product name
Select the Skycontroller settings screen.
The network name of your Parrot Skycontroller appears in your smartphone peripheral
devices list and in the FreeFlight 3 application settings menu. The name change will
only
take effect after restarting the Parrot Skycontroller.
Note: The network name of the Parrot Skycontroller can only contain letters, numerals
and underscores ("_"). It must not exceed 32 characters in length.
Wi-Fi
Note: Before flying the Parrot Bebop Drone, please ensure that you comply with the
Wi-Fi frequencies restrictions of your place of flight. Certain frequencies may be
restricted or forbidden. For example, in certain countries using the 5 GHz Wi-Fi band
may be prohibited in outdoor mode.
You can connect the Parrot Skycontroller to the 2.4 GHz or 5 GHz Wi-Fi bands.
The 2.4 GHz Wi-Fi band enables you to fly the Parrot Skycontroller from a
greater distance. It is generally more congested than the 5 GHz Wi-Fi band in
urban areas.
The 5 GHz Wi-Fi band enables you to obtain a better connection between the
Parrot Skycontroller and the Parrot Bebop Drone.