User manual

22 Settings
Settings
To open the settings screens via a smartphone:
1. Launch FreeFlight 3. For futher information, see Using FreeFlight 3.
2. Press Start > .
To open the settings screens via a HDMI screen (including FPV glasses):
1. Plug the HDMI screen to the Parrot Skycontroller.
> The piloting screen appears.
2. Press the joystick.
> The settings screens appear.
3. To slide the screens, turn the joystick to the left or right.
For further information about Parrot Skycontroller settings, see the Parrot Bebop Drone
user guide.
Calibrating the Parrot Skycontroller
Calibration enables to locate the Parrot Bebop Drone on the radar scope. When you
use the Parrot Skycontroller for the first time, an alert asks you to calibrate it.
1. Press the radar scope (red circle).
2. Follow the instructions on the screen.
3. One you completed the three steps, press .
Note: You can calibrate your Parrot Skycontroller at any time. To do so, select the
Skycontroller settings screen..
Changng the function of the buttons
You can change the function of each button and joystick of the Parrot Skycontroller.
Note: To set the Parrot Skycontroller buttons, ensure the last software version is
installed. For further information, see the Update tap of the support webpage.
To change the buttons and joysticks function: