User manual
Table Of Contents
11Before starting
Note: If the FreeFlight 3 main screen does not display the Parrot Bebop Drone video
feedback, press , then, select the Parrot Bebop Drone.
Manual connection via screen with HDMI port
1. Switch the Parrot Skycontroller, the Parrot Bebop Drone and the screen (or First
Person View glasses) on.
2. Plug the HDMI cable (or FPV glasses) on the HDMI port located on the left side of
the Parrot Skycontroller.
3. Press Manager Wi-Fi. For further information about the use of FPV glasses, see
Using FPV glasses.
4. Select your Parrot Bebop Drone.
> A pop-up asks you to connect your Parrot Bebop Drone.
5. Press OK.
> A signal tone indicates that the Parrot Bebop Drone is connected to the Parrot
Skycontroller. The Parrot Bebop Drone battery leds and the Wi-Fi leds light up. The
Parrot Bebop Drone is ready to be piloted with the Parrot Skycontroller.
Note: If the FreeFlight 3 main screen does not display the Parrot Bebop Drone video
feedback, press , then select the Parrot Bebop Drone.