SEQUOIA THE MULTISPECTRAL SENSOR FOR PRECISION AGRICULTURE I N T E G R AT I O N R E CO M M E N DAT I O N S CAPTURE THE INVISIBLE
HARDWARE POWER SUPPLY Whether it is supplied by the drone or an external power bank, the power supply shall comply Parrot Sequoia’s specifications. • Voltage: Minimal threshold 5V Maximal threshold 6V • Current: Minimal threshold 2.4 A Optimal recommendation 3A • Power: Minimal threshold 12W Optimal recommendation 15W USB CABLES It is recommended to use only the cables provided with the Parrot Sequoia sensor. If you want to use different cables, please refer to the Parrot Sequoia USB document.
DO’S AND DON’TS hen setting up the sensors, make sure that the cables are properly tightened and will not move W during the flight. To ensure high-precision results, Parrot recommends to take off the protective lens before the flight. I f a connection loss appears between the multispectral sensor and the Sunshine sensor, follow these steps: • Make sure that the minimal stress is applied on the USB connectors.
ACCESSORIES POWER SUPPLY It is recommended to use Parrot Sequoia on the Parrot’s fixed wing drones: Parrot Disco Pro AG & Sensefly eBee SQ, which benefit from a full, hardware, mechanical and software integration. If you want to integrate Parrot Sequoia on a different drone, please first refer to the sensors positioning section. INTEGRATION KITS Micasense developed integration kits for the 3DR Solo and the DJI Phantom 3. Learn more at www.micasense.
