Owner's Manual
Table Of Contents
- Please Update Your Sensor to the Latest Version Before Use
- User Guide
- Warning
- Parrot Bluegrass Presentation
- Parrot Skycontroller 2 Presentation
- Sequoia Presentation
- Sunshine Sensor
- Pre-Flight Checks
- Downloading the APP & Software
- Installing the Propellers
- Connect Your Tablet to Parrot Skycontroller 2
- Connect the Drone to Parrot Skycontroller 2
- Piloting Modes
- Parrotfields
- Pix4Dfields
- Sunshine Sensor LED
- Return to Starting Point
- Land
- Updating Sequoia
- Retrieving Photos
- Warning: Do Not Touch the Propellers
- Indicator Light Behaviour
- Technical Specs
- Maintenance
- General Information
- Instruction Manual
- Flight Safety Guidelines
- Battery Warning
28
-
VIA
THE
SEQUOIA
WEB
INTERFACE
'
Power
the
Parrot
Bluegrass
on.
Connect
to
the
drone's
Wi-Fi
network
then
enter
the
IP
address
192.168.42.2
into
the
Web
browser
.
1. Visit
the
Sequoia
support
page:
my.parrot-business.com/
2.
Download
the
update
file available in .
plf
format.
3.
Connect
to
the
Sequoia
Web
interface.
4.
Go
to
Settings.
5. Click
on
Update Sequoia.
6.
An
explorer
window
will
open
.
7. Select
your
update
file and click Open.
8. A Send
button
appears in
the
Settings
page
.
9. Click
the
Send
button.
>
The
update
starts automatically.
VIA
PARROTFIELDS
Before
each
flight,
the
ParrotFields
app
automatically
checks
for
any
available
update
.
If a
new
Parrot
Bluegrass
or
Sequoia
firmware
is
available,
the
app
informs
the
pilot.
If
his
smart
device
is
connected
to
the
Internet
(preferably
by
Wi-Fi),
the
pilot
can
download
and
install
the
firmware
.