Owner's Manual
Table Of Contents
- Please Update Your Sensor to the Latest Version Before Use
- User Guide
- Warning
- Parrot Bluegrass Presentation
- Parrot Skycontroller 2 Presentation
- Sequoia Presentation
- Sunshine Sensor
- Pre-Flight Checks
- Downloading the APP & Software
- Installing the Propellers
- Connect Your Tablet to Parrot Skycontroller 2
- Connect the Drone to Parrot Skycontroller 2
- Piloting Modes
- Parrotfields
- Pix4Dfields
- Sunshine Sensor LED
- Return to Starting Point
- Land
- Updating Sequoia
- Retrieving Photos
- Warning: Do Not Touch the Propellers
- Indicator Light Behaviour
- Technical Specs
- Maintenance
- General Information
- Instruction Manual
- Flight Safety Guidelines
- Battery Warning
18
-
The charge
time
is
about
2 hours and 30 minutes
for
a
flight
time
of
about
25 minutes.
INSTALLING
THE
BATTERY
INSIDE
.
THE
PARROT
BLUEGRASS
1. Remove
the
battery
compartment's
cover
from
the
back
of
the
drone.
2. Slide
the
battery
inside
the
compartment,
keeping
its wires
outside
and
to
the
left
.
3. Close
the
battery
compartment's
cover, leaving
the
wires
out
through
the
cover's aperture.
4.
Connect
the
black
wire
to
the
Parrot Bluegrass
connector.
5.
The
Parrot Bluegrass
emits
a
triple
tone:
it
is
ready
to
be
powered
on.
CHARGING
THE
PARROT
SKYCONTROLLER
2 BATTERY
1. Select
the
adapter
appropriate
for
your
country
and
attach
it
to
the
charger.
2.
Connect
the
charger cable
to
Parrot Skycontroller 2,
then
plug
the
charger
to
the
mains.
3.
When
the
charger's
control
light
turns
from
red
to
green,
the
charge
is
complete.