Owner's Manual
Table Of Contents
- Please Update Your Sensor to the Latest Version Before Use
- User Guide
- Warning
- Parrot Bluegrass Presentation
- Parrot Skycontroller 2 Presentation
- Sequoia Presentation
- Sunshine Sensor
- Pre-Flight Checks
- Downloading the APP & Software
- Installing the Propellers
- Connect Your Tablet to Parrot Skycontroller 2
- Connect the Drone to Parrot Skycontroller 2
- Piloting Modes
- Parrotfields
- Pix4Dfields
- Sunshine Sensor LED
- Return to Starting Point
- Land
- Updating Sequoia
- Retrieving Photos
- Warning: Do Not Touch the Propellers
- Indicator Light Behaviour
- Technical Specs
- Maintenance
- General Information
- Instruction Manual
- Flight Safety Guidelines
- Battery Warning
14
-
SUNSHINE
SENSOR
The
sunshine S€nsor
is
used
to
match each
image
taken
by
the
multispectral sensor,
to
the
light
available when
it
was taken. This enables
the
comparison
of
images
over
a
full flight,,
despite
variations in available
light
during
the
flight.
The
sunshine sensor
is
integrated
into
the
top
part
of
the
drone, facing
the
sky.
~
Parrot
recommends
using
the
SD card
provided
with
Sequoia. Performance is
not
guaranteed
with
other
SD cards. Refer
to
the
I ist
of
compa-
tible
SD cards
on
my
.parrot-business.com
Ambient
light
sensors·
Position
of
the
SD
card
Indicator
light:
reference
for
,
calibration
4 ambient light
sensors.
These sensors are
fitted
with
band-pass filters,
matching
those
of
the
multispectral
sensor
and
camera.
Other
sunshine sensor features:
• Inertial measurement unit;
• Magnetometer.










