User Manual

16 Getting Started
If the Pairing option is activated, the connection between the AR.Drone 2.0 and any other
Smartphone will not be possible.
To deactivate the Pairing option:
1. Launch Free Flight.
2. Tap the Training mode button and press TAKE OFF.
3. Press the button.
4. Deactivate the Pairing option.
LED colours
The LED lights (light emitting diodes) are the little red or green lights on the device. There are 2
types of LED on the AR.Drone 2.0:
- the 4 motor LEDs located close to the propellers
- the system LED located on the belly of the AR.Drone 2.0.
Motor LEDs
LED behaviour
Meaning
The 4 LEDs are red
Power is connected
A problem has occurred
Each LED flashes red
one after the other
The motors are starting up.
The 4 LEDS flash green
The AR.Drone 2.0 is currently taking off or landing.
The 2 front LEDs are green
The 2 rear LEDs are red
The AR.Drone 2.0 is currently flying. These colours make it
easy for you to distinguish the front and the rear of the
AR.Drone 2.0 (when at a distance from the device).