User's Manual

ENGLISH
22
Taking off
Install the battery into the battery box and connect it to the 1.
AR.Drone 2.0.
Place the AR.Drone 2.0 in a clear, flat and dry area and posi-2.
tion yourself at least 1 meter behind it.
Note:
The front of the AR.Drone 2.0 is easily identifiable
due to the camera located in the nose of the device.
Tap the 3.
button then:
a. Make sure the AR.Drone 2.0 is on a flat area then tap the
Flat Trim button.
b. Select the hull that is currently installed on the AR.Drone 2.0 (internal or external) and then
the type of flight (internal or external) that you wish to make.
c. Tap OK to validate.
Tap 4.
.
> The engines start and the AR.Drone 2.0 stabilizes itself automatically at an altitude of 1 meter.
LITHIUM POLYMER BATTERY
1000mAh 11.1V
10C CONTINUOUS DISCHARGE
CHARGE AT 1A MAX
Made in china
LITHIUM
1000
mA
h
11
.
1
V
10C CONTINUO
US DIS
C
HARGE AT 1A MAX
TTERY
nchina
Madein c
Flying the AR.Drone 2.0
Slide the joystick to the top to move the AR.Drone 2.0 higher (diagram •
1 p.8).
Slide the joystick to the bottom to move the AR.Drone 2.0 lower •
(diagram 2 p.8).
Slide the joystick to the right to move the AR.Drone 2.0 to the right •
(diagram 3 p.8).
Slide the joystick to the left to move the AR.Drone 2.0 to the left •
(diagram 4 p.8).