Operation Manual

12
Scrolling through the menus
Pairing the frame with your phone
1. Ensure that the frame is visible to all Bluetooth® devices.
To do so, select Settings > Bluetooth > Visibility.
2. Activate the Bluetooth feature on your phone / computer
(refer to your phone’s or computer’s user guide or visit
the Support heading on our website at www.parrot.com
for further information).
3. Search for Bluetooth devices on your phone / computer.
4. Select «Putman Frame» in the list of Bluetooth devices pro
posed by your phone / computer.
5. On your phone / computer, enter the code «0000».
> Your two devices are now paired.
Sending pictures to the frame
Sending pictures from a Phone or PDA via Bluetooth
1. Ensure that the frame is visible to all Bluetooth devices. To
do so, select Settings > Bluetooth > Visibility.
2. Make sure the Bluetooth feature is activated on
your phone or PDA.
3. On your phone/PDA, go to the Pictures menu. Select
a picture and choose «Send via Bluetooth». Your device
starts searching for Bluetooth peripherals.
4. Once the search has finished, select «Putman Frame».
5. If your device prompts you to enter a code, type «0000».
> The picture is then sent to the Parrot Frame by Andrée
You can scroll through the menus using the buttons on
the back of the frame. To access the main menu, press
the button on the back of the frame.
: Move left or up, depending on the frame’s
orientation. It can also be used to select the
previous photo.
: Move right or down, depending on the frame’s
orientation. It can also be used to select the next
photo.
: Enters the selected menu or selects a photo.
The icon takes you back to the previous menu or
exits the menus.
Depending on the model of your phone / computer,
this phase might be optional. However, it will enable
you to send your photos to the frame more quickly.