ENGLISH Your Parrot Bebop-Pro Thermal™ contains the following items: 1. A Parrot Bebop-Pro Thermal™ drone; 2. A Parrot Skycontroller 2™ lever. You can fly your Parrot Bebop-Pro thermal with the Parrot Skycontroller 2 by downloading the FreeFlight Thermal™ app to your tablet. This app is free of charge but might contain In-App Purchase offers. It also allows you to calibrate your Parrot Bebop-Pro thermal; 3. One Flir One Pro camera. Fitted to your Parrot Bebop-Pro Thermal; 4. Three power batteries.
WARNING 1. 2. 3. 4. 6 The Parrot Bebop-Pro thermal IS NOT A TOY. It should not be used or handled by a child under the age of 14 years. BEFORE USING the Parrot Bebop-Pro thermal: (A) READ CAREFULLY this User Guide and all information and documentation available at www.parrot.com, which may be updated at any time and without prior notice (hereinafter "Parrot Documentation").
ENGLISH PRESENTATION OF THE PARROT BEBOP-PRO THERMAL Thermal-imaging camera On/Off button LED light Power Battery Camera 7
PRESENTATION OF THE PARROT SKYCONTROLLER 2 Antenna Smartphone holder location B On/Off button Settings Return to departure point 8 Take off/ Land A During the flight: take a picture In the settings menu: confirm During flight: start/stop video recording In the settings menu: return
ENGLISH Switch to direct view or thermal view Set the camera exposure USB port Vertical orientation of the HD camera Change the display mode on the application.
PRESENTATION OF THE FLIR ONE PRO CAMERA Type C USB port for data transfer Type C USB port for charging ON/OFF button Do not interchange USB type C ports for charging and data transfer.
ENGLISH BEFORE GET TING STARTED Before use, refer to the Battery section in the General Information section. CHARGING THE BAT TERY OF THE PARROT BEBOP-PRO THERMAL 1. Select the plug (provided) for your country and insert it into the charger. 2. Connect the supplied cable to the charger. 3. Connect the Power battery to the charger's cable, and then plug the charger into the mains. The warning light is red while charging and then turns green when the battery is charged.
CHECKING THE PROPELLERS Place and lock the propellers on the engines of the Parrot Bebop-Pro Power as shown in Figure 1 using the supplied propeller mounting tool (Figure 2).
FIT TING THE BAT TERY ENGLISH Slide the Parrot Bebop-Pro Thermal battery in until you hear a click. The latch on the back of the battery must be in the lower position (Figure 3). Check that the Flir One Pro camera is in a horizontal position before handling the battery. 3 DOWNLOAD THE APP Log in to Google PlayTM and download the FreeFlight Thermal app for free. PRE-FLIGHT CHECKS REGULATIONS • The Bebop-Pro Thermal must be used according to the civil aviation regulations in your country.
• • • • It may not be permitted to use the Bebop-Pro Thermal in certain places in the public domain (e.g. train station, airport, etc.) or on public roads. The pilot must keep continuous visual contact with the Bebop Thermal and control its trajectory. Before flying your Bebop-Pro Thermal, seek information about restrictions on the use of WiFi frequencies at your flight location. Certain frequencies may be restricted or prohibited.
BEBOP-PRO THERMAL • • • • • ENGLISH • Make sure that the Bebop-Pro Thermal has detected the GPS signal. Make sure the Bebop-Pro Thermal propellers are properly mounted and secured. Make sure the Bebop Thermal battery is charged. Make sure you have enough memory for video recording. Make sure you have enough memory on your smartphone for video recording. Make sure you are in a wide open space. THERMAL-IMAGING CAMERA • • • • Make sure that the lenses are clean.
CONNECT TO THE PARROT BEBOP-PRO THERMAL CONNECT THE PARROT SKYCONTROLLER 2 TO YOUR PARROT BEBOP-PRO THERMAL 1. Place the Parrot Bebop-Pro Thermal on a flat surface. 2. Turn on your Parrot Bebop-Pro Thermal. 3. Press the ON/OFF button on the Parrot Skycontroller 2 to turn it on. 4. Wait until the warning light is solid green. >> You are connected to the Parrot Bebop-Pro Thermal, you can control it. USING THE PARROT SKYCONTROLLER 2 WITH AN ANDROID TABLET 1.
B A B ENGLISH You can rotate the holder to fit your tablet's dimensions. To do this, press down on it and rotate it. A 2. Press the right button on the holder to fully open it. 3. Position your tablet on the holder. 4. Tighten the holder on your tablet. B A 5. Turn on Parrot Skycontroller 2 and your drone. 6. Using your tablet's USB cable, connect your tablet to the Parrot Skycontroller 2's USB port. >> The FreeFlight Thermal app starts automatically. You are connected.
LAUNCHING FREEFLIGHT THERMAL To see the compatibility of FreeFlight Thermal on Android tablets, go to: http://www.parrot.com Once the drone is connected, press Fly & Film To access the control interface. On FreeFlight Thermal, the FLIR button switches between the front HD camera view and the thermal imaging view. >> The direction of control is given in relation to the camera used, in thermal imaging view the direction of control of the drone is therefore reversed.
FLYING ENGLISH LEFT CONTROL RIGHT CONTROL STICK Thermal B B A A Go up HD Go forward Thermal B A B Go down A HD Go backward HD B A Rotate right B A Move right HD B B A Rotate left Thermal Thermal A Move left 19
RETURN TO STARTING POSITION To return the Parrot Bebop-Pro Thermal to its starting point, press the button on the Parrot Skycontroller 2. >> The Parrot Bebop-Pro thermal returns to its starting position. Make sure you are in an open environment. LAND Press the button on the Parrot Skycontroller 2. >> The Parrot Bebop-Pro Thermal lands.
ENGLISH BEHAVIOUR OF THE LED LIGHT PARROT SKYCONTROLLER 2 The Parrot Skycontroller 2 is trying to connect to a drone. > Make sure your drone is on. Or Flashing red light The battery of the Parrot Skycontroller 2 or your drone is low. > Recharge the battery. Or The Parrot Skycontroller 2 has detected a problem with the drone. > Go to the Support section on www.parrot. com. Solid green The Parrot Skycontroller 2 is connected to the drone. > You can fly the drone.
PARROT BEBOP-PRO THERMAL 22 Solid blue You can control the Parrot Bebop-Pro thermal. Blue flashing slowly The Parrot Bebop-Pro thermal is starting up. Blue flashing quickly An engine error has been detected. To locate the defective engine: In the FreeFlight Pro app, go to Fly & Film > > Information The screen displays the damaged engine. Check that nothing is blocking the engine.
ENGLISH TECHNICAL SPECIFICATIONS BEBOP-PRO THERMAL • • • • • • Front HD Camera Flir One Pro thermal imaging camera 32 GB internal memory Operating range: 0° - 35°C Autonomy of flight: 25 minutes Weight: 600g FLIR ONE PRO • Thermal resolution: 160 x 120 • Thermal sensitivity: 150 mK • Focus: 15 cm - Infinity REMOVABLE BATTERY • • • • 3350 mAh 3 Cell LiPo Battery Battery life: 25 minutes Rated voltage: 11.
GENERAL INFORMATION ACCESSORIES AND SPARE PARTS Accessories and spare parts are available from your Parrot retailer or on www. parrot.com. PRECAUTIONS FOR USE AND MAINTENANCE PARROT SKYCONTROLLER 2 The Parrot Skycontroller 2 is intended to fly the Bebop Drone, the Parrot Bebop 2 and the Parrot-Pro Thermal and is not suitable for children under 14 years of age. Check the list of drones that are compatible with the Parrot Skycontroller 2 in the Support section on www.parrot.com.
Risk of ingestion of small objects. The packaging is not part of the product and must be discarded as a safety measure. ENGLISH FLIR ONE PRO Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, allow the device to dry. Do not use or store the device in dusty or dirty areas. Moving parts and electronic components can be damaged. Do not store the device in cold temperatures.
EU DECLARATION OF CONFORMITY (PARROT SKYCONTROLLER 2) The Parrot Skycontroller 2 can be used in: DE, AT, BE, BG, CY, HR, DK, ES, EE, FI, FR, GR, HU, IR, IT, LV, LT, LU, MT, NL, PL, PT, CZ, RO, GB, SK, SI, SE.
ENGLISH This device complies with part 15 of the Industry Canada RSS applicable to license-exempt radio apparatus. Operation is permitted subject to the following two conditions: 1. The device must not cause interference; 2. The user of the equipment must accept any interference suffered, even if the interference is likely to affect the operation of the equipment. This mobile device with an antenna meets the FCC limits for radiation exposure established for an uncontrolled environment.
charger than the one provided with the product. Never trickle charge or charge under 3 V per cell. The temperature of the battery should never exceed 60°C (140°F) otherwise the battery may become damaged or ignited. Never charge on a flammable surface, near flammable products or inside a vehicle (preferably place the battery in a non-flammable and non-conductive container). Never leave the battery unattended during the charging process.
