User guide

Free flight 22
Landing
Make sure that the AR.Drone is directly above a flat, dry and unobstructed surface and then press on
the button .
Status icons
The icon indicates the Wi-Fi signal strength between the AR.Drone and the iPhone. The number of
bars displayed is proportional to the signal strength.
The icon indicates the remaining battery charge of the AR.Drone.
Error messages
Start-up problems
Message
Explanation/Correction
WIFI NOT
REACHABLE
The iPhone WiFi is disabled
Activate WiFi on your iPhone. To do this, select Settings > Wi-Fi.
CAN’T CONNECT
TO TOY
The iPhone is not connected to the AR.Drone
The iPhone has lost connection to the AR.Drone
Refer to the Troubleshooting section for more information.
START NOT
RECEIVED
The take off command has not been registered.
Note: This message may appear then disappear straight away and the AR.
Drone takes off just after.
Restart the AR.Drone.
If the problem persists, it may be necessary to replace the mother
board.
NO VIDEO
CONNECTION
ALERT
The video flows from the AR.Drone are not being sent to the iPhone.
Check the connections of the video ribbon cables. View the repair
videos for more information.