User guide

9 Getting Started
Connecting the iPhone to the AR.Drone
Activating airplane mode
For improved ease of use, we recommend that you configure
your iPhone to run in flight mode. To do so, simply select
Settings > Airplane mode.
Connecting the iPhone to the Wi-Fi network of the AR.Drone
1. Connect the AR.Drone's battery. Wait until the system
LED is green.
2. On your iPhone, select Settings > Wi-Fi.
> The list of available Wi-Fi devices will be displayed.
3. Select ardrone_parrot.
Note: The name by which the AR.Drone is known by your
iPhone and other Wi-Fi devices can be modified. Please refer
to the section on Basic settings for more information.
4. Wait until the network name is checked.
> The Wi-Fi logo will appear on the iPhone screen.
Note: Once the connection between your iPhone and the AR.Drone has been established, the two
devices are automatically paired. Only the iPhone that you have used to make the connection can be
used with that AR.Drone.
To use the AR.Drone with another iPhone, please refer to the Erasing the memory of the AR.Drone
section.
Using the AR.Drone with several iPhones
If you wish to use your AR.Drone with another iPhone, you must erase the memory of the AR.Drone.
1. Press the Unpair button using a fine-tipped object. You should hear a little "click".
> The 4 LEDs located on the motors will flash alternately red and green.