User's Manual

11
Putman.
> During transmission, the Bluetooth icon appears on the
screen and the picture is displayed.
Sending pictures from a Computer via Bluetooth
(Windows, Linux)
1. Ensure that the frame is visible to all Bluetooth devices. To
do so, select Settings > Bluetooth > Visibility.
2. Activate the Bluetooth feature on your computer.
3. Right-click on the picture that you wish to send and
choose «Send via Bluetooth».
> Your PC will search for any nearby
Bluetooth peripherals.
4. Select «Putman Frame».
5. Type «0000» if your PC prompts you to enter a code.
> During transmission, the Bluetooth icon appears on the
screen and the picture is displayed.
Sending pictures via USB
1. Connect the frame to your PC with the USB cable.
> The computer detects a new device.
2. Copy your JPEG or GIF pictures to the frame.
3. Disconnect the cable from the frame.
> The pictures are automatically saved.
4. Repeat the procedure if you wish to transfer new pictures.
Transferring pictures using a memory card
1. Insert the memory card into the appropriate slot.
> The JPEG and GIF pictures stored on the memory card
are displayed.
> You can now navigate through the memory card content
using the buttons.
2. Select the icon. Select one of the following
options as required:
- Copy current picture
Several pictures can be sent at a time, though this
feature will depend on your device.
The Parrot Frame by Andrée Putman features 10
Mb of storage space: to save space, remember to
resize your pictures before copying them to the
internal memory. Otherwise transfer your pictures
and disconnect the cable when the «memory full»
message is displayed. Then reconnect the cable
and transfer the remaining pictures.