User manual
Table Of Contents
- Using this guide
 - About ANAFI Ai documentation
 - Prerequisites
 - Foreword
 - Disclaimer
 - Technical specifications
 - Package contents
 - Presentation of ANAFI Ai
 - Presentation of Parrot Skycontroller 4
 - 4G Connectivity
 - Data sharing and User accounts
 - Obstacle avoidance
 - Calibrations
 - Pre-flight reminders
 - Getting started
 - Taking off
 - Flying
 - Returning home: Smart RTH
 - Landing
 - Smart LiPo Battery
 - Media retrieval
 - Introducing FreeFlight 7
 - Settings
 - Advanced Settings
 - Videos, Photos and Panoramas
 - Gimbal tilt and zoom controls
 - Advanced imaging
 - Missions: Piloting
 - Missions: Photogrammetry
 - Missions: Flight Plan
 - Missions: Cameraman
 - Missions: Vehicle
 - Missions: Touch & Fly
 - Flight logs and projects management
 - Maintenance and Troubleshooting
 - Appendix 1: Operational Checklist
 
  V7.4.1.0 – published on December 20, 2022       92  
  Exposure      -3.0 to +3/0 EV (DV: 0.0 EV)  
  White balance  Auto / Sunny / Cloudy 
Tap box to select Flight Parameters: 
4G upload     
Yes / No 
Obstacle avoidance   
Yes / No 
Final RTH     
Yes / No 
RTH on data link loss  
Yes / No 
Altitude     
From 5 m (DV: 50 m) 
Number of photos    
18 to 90 
Camera tilt     
-90% to 0.0° (DV: -45°)  
Tap “Done” when ready.  
Tap “Play” to launch the flight.  
1-Click 
1-Click photogrammetry flights are designed to create the 3D model of a single building, with a single tap on 
the screen. 
Tap the box which appeared on the map over the building you want to model.  
The box turns green. 
Define Building height if it is unknown by the land register, as in the following screenshot.  
Tab box to select Image Parameters: 
  Resolution       12MP / 48MP 
  Exposure      -3.0 to +3/0 EV (DV: 0.0 EV)  
  White balance  Auto / Sunny / Cloudy 
Tap box to select Flight Parameters: 
4G upload     
Yes / No 
FreeFlight 
7: 
Orbit photogrammetry 










