User manual

V7.4.1.0 – published on December 20, 2022 78
Tap “Generate Panorama” to create the panorama (or browse the individual pictures with the slider
on the right).
When the panorama creation is complete, FreeFlight 7 displays the result.
About media Metadata
ANAFI Ai photos and videos contain Metadata with the drone telemetry elements (position, altitude, speed,
battery level, etc.) and video metrics (angle of the camera, exposure value, field of view, etc.).
The altitude in the photo Metadata is based on WGS84 whereas the altitude displayed on FreeFlight7 is the
altitude above takeoff. Because of that, both values might differ depending on the take-off location.
You can learn more about the embedded photo Metadata here, and more about embedded video
Metadata here.
Gimbal tilt and zoom controls
ANAFI Ai features a controllable gimbal (180° tilt range, from nadir to zenith) and a 6x zoom. This section
presents these features and the way to activate them.
Gimbal tilt control
ANAFI Ai’s gimbal tilt control is activated through the left trigger of Parrot Skycontroller 4. It is available in all
video and photo modes, and in all manual piloting modes.
- To aim the gimbal toward the ground, push the tilt control trigger down.
- To aim the gimbal toward the sky, pull the tilt control trigger up.
- To reset the gimbal tilt to a horizontal position, press the optics reset button on the left of
Parrot Skycontroller 4 (this action also resets the zoom factor of the lens to 1x).
Zoom control
ANAFI Ai’s zoom control is activated through the right trigger of Parrot Skycontroller 4. It is available in all
video modes, and in JPEG RECT photo mode (with an impact on the final resolution of your pictures). WIDE
photo modes imply the use and rendering of all 48MP delivered by ANAFI Ai’s CMOS sensor: zoom is
deactivated in both WIDE photo modes.
- To zoom in on a subject, push the zoom trigger down.
- To zoom out, pull the zoom trigger up.
- Pressing the optics reset button on the left of Parrot Skycontroller 4 instantly resets the zoom
factor of the lens to 1x (this action also resets the gimbal tilt to a horizontal position).
The HUD of FreeFlight 7 presents precise, decimal-by-decimal zoom information at all times, in the middle of
the left side of the screen, as shown on the following screenshots.