User manual

V7.4.1.0 – published on December 20, 2022 68
RTH
Through RTH settings, you define the behavior of your drone when the RTH feature is activated.
The following screenshot displays the default values of the menu. The Hovering slider is set at 2 m and it is
configurable between 1 m and 10 m. The RTH minimum height is set at 50 m and it is configurable between
20 m and 100 m.
RTH settings
Tap “RESET RTH PREFERENCES” on the bottom of the page to reset to default.
The RTH can be used automatically if the weather is frosty fog or if the batterie as been disconnected.
Recording
Recording settings enable you to select camera options, both in photo and video modes.
The default values are displayed in the following screenshot.
About Overexposure display: when this setting is activated, the HUD of FreeFlight 7 shows all overexposed
areas of the screen as hatched, which enables you to fine-tune your framing, your EV settings, or both.
About Picture signatures: this feature allows authentication and proof of integrity of files produced by
ANAFI Ai (to serve as evidence, for example), but it can increase the achievable time interval between
photos in Timelapse and GPS-lapse modes. When this feature is activated, a .sig file is recorded
simultaneously with each picture taken.
About Anti-flickering: this setting and the associated technology aim at eliminating the flicker effect which
can arise due to some artificial lights. The “AUTO” option should work for most users, but depending on your
Recording settings