User manual

V7.4.1.0 – published on December 20, 2022 55
Battery charging
To charge ANAFI Ai’s smart LiPo battery, use one of the enclosed USB-C to USB-C cable to plug the
battery to its charger, or to:
o a tabletop or laptop computer’s USB-C port; o a
power bank’s USB-C port.
Full charging time depends on charger specifications and ambient temperature. At 20°C, you can expect
charging your battery in 2 hours.
When ANAFI Ai’s smart LiPo battery is plugged to a power source and charging, its 4 LEDs indicate in real time
its level of charge:
LED 1 flashing:
battery is between 0 and 25% charged
LED 1 steady & LED 2 flashing:
battery is between 25 and 50% charged
LEDs 1 and 2 steady & LED 3 flashing:
battery is between 50 and 75% charged
LEDs 1, 2 and 3 steady & LED 4 flashing:
battery is between 75 and 100% charged
Battery is plugged and all LEDs are off:
battery is full
Similarly, when your battery is not installed on ANAFI Ai, you can check its charge level at any time by pressing
its power button:
1 steady LED lights up:
battery is between 0 and 25% charged
2 steady LEDs light up:
battery is between 25 and 50% charged
3 steady LEDs light up:
battery is between 50 and 75% charged
ANAFI
Ai
:
battery
ready for
installation