User manual
Table Of Contents
- Using this guide
- About ANAFI Ai documentation
- Prerequisites
- Foreword
- Disclaimer
- Technical specifications
- Package contents
- Presentation of ANAFI Ai
- Presentation of Parrot Skycontroller 4
- 4G Connectivity
- Data sharing and User accounts
- Obstacle avoidance
- Calibrations
- Pre-flight reminders
- Getting started
- Taking off
- Flying
- Returning home: Smart RTH
- Landing
- Smart LiPo Battery
- Media retrieval
- Introducing FreeFlight 7
- Settings
- Advanced Settings
- Videos, Photos and Panoramas
- Gimbal tilt and zoom controls
- Advanced imaging
- Missions: Piloting
- Missions: Photogrammetry
- Missions: Flight Plan
- Missions: Cameraman
- Missions: Vehicle
- Missions: Touch & Fly
- Flight logs and projects management
- Maintenance and Troubleshooting
- Appendix 1: Operational Checklist
V7.4.1.0 – published on December 20, 2022 51
Pilot Smart RTH
When the “Pilot” advanced RTH option is selected, ANAFI Ai comes back to the GPS position of the device
used to control the drone (whether linked to a Parrot Skycontroller 4 or not) at the exact moment an RTH
procedure is activated – or to the last known coordinates of the device, in case it has lost GPS fix.
For this reason, we recommend ANAFI Ai pilots not to move, after they have activated an RTH procedure,
when in “Pilot” advanced RTH mode.
ANAFI Ai performing a Pilot RTH – note that under 20%, the battery power indicator is highlighted in orange
Landing
L
anding
in progress
Fly
ANAFI
Ai
directly over
a flat, even, and clear surface, then
press the
button
:
ANAFI
Ai
lands.